An Idea to Save Electricity

Non-outdoors topics. News, sports, hobbies, politics, humor.

Re: An Idea to Save Electricity

Postby Perry » Thu Oct 01, 2015 11:52 am

I'm thinking 50 X 1"-20ft PVC pipe:
http://www.lowes.com/pd_23975-1814-PVC+04010B+0800_0__

$440 (plus tax, minus quantity discount)for 1,000 feet of length. All run in parallel reduces frictional losses compared to any series-parallel combination.

Edit: the heat transfer increases with turbulent flow compared to laminar flow, so it is a bit more complicated to optimize. I think the optimal pipe lengths will also vary depending on whether the system is open loop or closed loop.
Running Shoe Experiments: https://youtube.com/@perryscanlon
User avatar
Perry
Site Admin
 
Posts: 1524
Joined: Mon May 08, 2006 6:01 pm
Location: Palm Springs, CA

Re: An Idea to Save Electricity

Postby Perry » Tue Oct 06, 2015 10:28 am

Over the weekend I went trail running and paid more attention to the pools at the houses below. Most houses don't have pools, so it's likely that the majority of residential electricity use is AC and not pool heating. Of the houses that do have pools, it's hard to tell from a distance the difference between a solar panel and a solar collector, and house with nothing on the roof: hard to know whether the pool is heated or unheated. I did see one pool that was either navy blue or royal blue, difficult to tell for sure on a cloudy day. I thought it looked nice.

Back to the original subject...

According to this site, geothermal heat pumps are about $12,000 to $15,000 for full installation services and $3,500 to $7,500 for DIY route.
http://home.costhelper.com/geothermal-heat-pump.html

I think an air-based system (either open loop or closed loop) can be built on an existing AC system for $1,500 in supplies, going DIY. Found a tube fan for $300 here:
http://www.qcsupply.com/commercial-indu ... t-fan.html

And possibly a lower price on 1" by 20' PVC pipe:
http://hardwareonlinestore.com/index.ph ... t_id=41045

DIY would be a bit of work, but if someone were to mass produce a system that's somewhat easy to install, that would be affordable to a lot of homeowners because it would pay for itself quickly.
Running Shoe Experiments: https://youtube.com/@perryscanlon
User avatar
Perry
Site Admin
 
Posts: 1524
Joined: Mon May 08, 2006 6:01 pm
Location: Palm Springs, CA

Previous

Return to General Chat

Who is online

Users browsing this forum: No registered users and 1 guest

cron