Couldn't Find The Trail To Villager Peak

General Palm Springs area.

Postby cab » Tue Apr 26, 2011 10:39 am

I had the same problem as you, MACgyver when I was there a couple of months ago. I ended up just going up Rattlesnake Canyon a short ways and then going left up the somewhat steep (but not rocky) slope to the top of the ridge. From there, the trail was easy to find and follow.

On the way down, as long as you keep following the trail, you will easily find the switchbacks that lead down the foot of the ridge back to the flat desert.
User avatar
cab
 
Posts: 9
Joined: Wed Nov 10, 2010 4:31 pm
Location: Brea, CA

Postby asabat » Tue Apr 26, 2011 3:04 pm

Andy wrote:For instance, rather than just a one-dimensional point, a rudimentary direction/arrow thingy would be very helpful. Maybe you just toss a few extra rocks on one side kind of like the tail of an arrow...


Actually, this is the opposite of what trail signs should be. I learned years ago a turn was marked with a cairn of several rocks and then a single rock pointing the way to go.

For example: (O = 2 rocks stacked, o = single rock)

Oo

means turn right.

I have never seen this in the field, well, maybe once, other than at scouting events and the like.
asabat
 
Posts: 168
Joined: Wed Apr 11, 2007 7:47 pm

Postby MACgyver » Wed Apr 27, 2011 8:20 am

Hi 2600fromatari,
Thanks for the post and the good advice. I'm not anticipating any problems in finding the start of the trail up the ridge anymore.
Thanks also for the heads-up about the 4 mile mark and the last mile. I do use MotionX GPS on my iPhone 4. I already have the Peak as a waypoint, and I have seen a photo of the Cairn at the summit of Villager. I already added 5 or 6 waypoints at the beginning of the switchbacks leading out of the wash. Now that I know that the last mile could be a little difficult to follow, I am planning on adding a few more waypoints for the last mile to the top. Thanks again! :mrgreen:
User avatar
MACgyver
 
Posts: 16
Joined: Wed Sep 22, 2010 5:06 pm
Location: Palm Desert, CA

Postby KathyW » Wed Apr 27, 2011 9:13 am

Just head to to the ridge on the left side of Rattlesnake Canyon:

http://kathywing.smugmug.com/California ... j4gCv-A-LB

Get on the ridge and go - not much to it from there.

Use trails are sometimes obvious and sometimes they are not. As you spend more time off the beaten path in the wilderness, use trails get easier to spot.
KathyW
 
Posts: 1138
Joined: Wed Dec 27, 2006 6:17 pm

Postby bluerail » Wed Apr 27, 2011 11:42 am

Once you get to villager..there is a nice place to rest at the camping area north of the summit.
User avatar
bluerail
 
Posts: 2108
Joined: Thu Dec 11, 2008 10:30 am
Location: La Quinta

Postby » Wed Apr 27, 2011 11:56 am

there's also many nice places to get stung by cholla!
 
Posts: 552
Joined: Mon Jun 09, 2008 8:41 pm

Postby DaddyLongLegs » Thu Apr 28, 2011 11:09 am

It's best not to find that trail. Hiking back down it was about the thirstiest I've ever been.
User avatar
DaddyLongLegs
 
Posts: 105
Joined: Mon Jan 11, 2010 11:30 pm
Location: Orange County, CA

Postby Andy » Thu Apr 28, 2011 6:34 pm

asabat wrote:
Actually, this is the opposite of what trail signs should be. I learned years ago a turn was marked with a cairn of several rocks and then a single rock pointing the way to go.

For example: (O = 2 rocks stacked, o = single rock)

Oo

means turn right.

I have never seen this in the field, well, maybe once, other than at scouting events and the like.


Interesting. I'll have to keep that in mind next time I'm trekking through "cairn country"
Andy
 
Posts: 350
Joined: Mon Feb 04, 2008 4:21 pm
Location: Temecula

Postby MACgyver » Mon May 02, 2011 2:32 pm

Just to put this topic to bed...I'd like to report that I made my second attempt on the Villager Peak trail yesterday without any problems. I hiked directly over to the switchbacks leading up the ridge thanks to those of you that pointed out where they were in my pictures. I actually saw the trail leading up when I was about a quarter of a mile away this time. What had happened the first attempt was that in following the trail from the end of the Lute to the ridge which crosses all the washes along the way, I went astray following a cairn off to my right that actually went directly up one of the washes instead of crossing it. Eventually I ended up in the final wash along the ridge, but I was way to the right of where the actual trail enters. From now on I am pledging to not follow any cairns that aren't in the direction of my next waypoint. It is so easy to just follow them like an animal following bits of discarded food!!
Anyway, thanks again to all of you who straightened me out. Having the actual waypoint in the wash area helped, too. I didn't plan on doing the entire hike yesterday...just a little exploration. I hiked out 3.75 miles to an elevation of 3,400 ft. Now I am sitting back waiting for another cold front passage to happen (won't be this week it looks like with this strong high sitting on us), then I will do the entire thing. I'll post some pictures and share my experiences after that happens. :D
User avatar
MACgyver
 
Posts: 16
Joined: Wed Sep 22, 2010 5:06 pm
Location: Palm Desert, CA

Postby lilbitmo » Mon May 02, 2011 4:17 pm

Good job MACgyver, glad you were able to find it, have to get out there in the fall myself :D
User avatar
lilbitmo
 
Posts: 550
Joined: Sun Feb 03, 2008 11:37 pm

PreviousNext

Return to Mt. San Jacinto & Santa Rosa Mountains

Who is online

Users browsing this forum: Baidu [Spider] and 6 guests